Rovibec Twin Vertical Auger Stationary Mixer:
3 models are available, going from 620 to 775 cubic feed (17.55 m3 to 24 m3)
The various elements of the tub have been assembled to offer an exceptionnal mix quality. The width of the floor, the angle of the walls and the inner tips are forming an ideal whole to ensure an homogeneous mix. Whether it is used for shredding bales or silage, give your animals a high-quality preparation.
The augers and their configuration in the tub are an important part of your vertical mixer. Made of 3/4” thick 44W Canadian steel and with a stainless steel base, your augers are there to last. They are positionned to facilitate the exchange of foodstuff between the back and the front of the mixer and contribute to an efficient unloading of the tub.
The tub can also be doubled with stainless steel for increased durability.
To ensure a perfect unloading, our vertical stationary TMR mixer is equiped with a front centered door that is wide and high – with an electric actuator.
The stationary mixers of the Victor Signature range are all equipped with a direct drive engine.
This allows the mixer to be efficient while being energy efficient.
In addition, the PTO drive shaft is enclosed and does not require maintenance, unlike a standard model.
More performance and less maintenance! Our Victor Signature vertical mixer will be your daily ally for an incomparable RTM.
M62S Twin Auger:
620 ft3 (12.23 m3) with 12″ (30.5 cm) rubber extension
Heavy Duty planetary
Enclosed PTO, lubrication free
DINAMICA or DIGISTAR scale and 4 loadcells, up to 10 000Lbs (4535 Kg)
Front centered discharge door controlled by an electric cylinder
5 knives per auger (4 tungsten and 1 vertical) with a strong back
211″3/4 X 108″ X 85″1/2 (538 cm X 274 cm X 217 cm)
12 750 Lbs (5 785 Kg)
Frame, deck, magnet trap, overflow restriction chain
M75S Twin Auger:
750 ft3 (21 m3) with 12″ (30.5 cm) rubber extension
Heavy Duty planetary
Enclosed PTO, lubrication free
Balance DINAMICA or DIGISTAR and 4 loadcells, up to 10 000Lbs (4535 Kg)
Front centered discharge door controlled by an electric cylinder 1500Lbs (680Kg) torque with amp management
5 knives per auger (4 tungsten and 1 vertical) with a strong back
193″7/8 X 113″1/8 X 102″1/2 (492 cm X 287 cm X 260 cm)
16 000 Lbs (7 257 Kg)
Frame, deck, magnet trap, overflow restriction chain
M90S Twin Auger:
775 ft3 (24 m3) no rubber extension available
Heavy Duty planetary
Enclosed PTO, lubrication free
DINAMICA or DIGISTAR scale and 4 loadcells, up to 10 000Lbs (4535 Kg)
Front centered discharge door controlled by an electric cylinder
5 knives per auger (4 tungsten and 1 vertical) with a strong back
193″7/8 X 113″3/8 X 112″7/8 (492 cm X 288 cm X 286 cm)
18 000 Lbs (8 165 Kg)
Frame, deck, magnet trap, overflow restriction chain