Stationary Vertical Mixers

Rovibec Twin Vertical Auger Stationary Mixer

Overview
Overview

Rovibec Twin Vertical Auger Stationary Mixer:

3 models are available, going from 620 to 775 cubic feed (17.55 m3 to 24 m3)

A TUB AND AUGERS FOR AN OPTIMAL MIX

The various elements of the tub have been assembled to offer an exceptionnal mix quality. The width of the floor, the angle of the walls and the inner tips are forming an ideal whole to ensure an homogeneous mix. Whether it is used for shredding bales or silage, give your animals a high-quality preparation.

The augers and their configuration in the tub are an important part of your vertical mixer. Made of 3/4” thick 44W Canadian steel and with a stainless steel base, your augers are there to last. They are positionned to facilitate the exchange of foodstuff between the back and the front of the mixer and contribute to an efficient unloading of the tub.

The tub can also be doubled with stainless steel for increased durability.

To ensure a perfect unloading, our vertical stationary TMR mixer is equiped with a front centered door that is wide and high – with an electric actuator.

INNOVATION AND PERFORMANCE OF A DIRECT DRIVE MOTORIZATION

The stationary mixers of the Victor Signature range are all equipped with a direct drive engine.

This allows the mixer to be efficient while being energy efficient.

In addition, the PTO drive shaft is enclosed and does not require maintenance, unlike a standard model.

More performance and less maintenance! Our Victor Signature vertical mixer will be your daily ally for an incomparable RTM.

TECHNICAL SPECS

M62S Twin Auger:

CAPACITY

620 ft3 (12.23 m3) with 12″ (30.5 cm) rubber extension

MOTORIZATION

  • High efficiency Direct Drive motor with variable speed
  • 50HP 240v, 380v or 600v or 75HP 600v

 

CONTROL PANEL AND DRIVE

  • Manual control pannel 50HP or 75HP
  • Drive control up to 4 speed motor for auger rotations

 

PLANETARY

Heavy Duty planetary

PTO

Enclosed PTO, lubrication free

SCALE AND LOADCELLS

DINAMICA or DIGISTAR scale and 4 loadcells, up to 10 000Lbs (4535 Kg)

DISCHARGE DOOR

Front centered discharge door controlled by an electric cylinder

STEEL

  • Canadian steel 44W – 3/4″ (19 mm) thick tub floor and 1/4″ (6mm) for the walls
  • 3/4” (19mm) auger

 

KNIVES

5 knives per auger (4 tungsten and 1 vertical) with a strong back

DIMENSIONS WITHOUT EXTENSION

211″3/4 X 108″ X 85″1/2 (538 cm X 274 cm X 217 cm)

WEIGHT (WITHOUT EXTENSION)

12 750 Lbs (5 785 Kg)

OPTIONS

Frame, deck, magnet trap, overflow restriction chain

 

M75S Twin Auger:

CAPACITY

750 ft3 (21 m3) with 12″ (30.5 cm) rubber extension

MOTORIZATION

  • High efficiency Direct Drive motor with variable speed
  • 75HP 600v

 

CONTROL PANEL AND DRIVE

  • Manual control pannel 75HP
  • Drive control up to 4 speed motor for auger rotations

 

PLANETARY

Heavy Duty planetary

PTO

Enclosed PTO, lubrication free

SCALE AND LOADCELLS

Balance DINAMICA or DIGISTAR and 4 loadcells, up to 10 000Lbs (4535 Kg)

DISCHARGE DOOR

Front centered discharge door controlled by an electric cylinder 1500Lbs (680Kg) torque with amp management

STEEL

  • Canadian steel 44W – 3/4″ (19 mm) thick tub floor and 1/4″ (6mm) for the walls
  • 3/4” (19mm) auger

 

KNIVES

5 knives per auger (4 tungsten and 1 vertical) with a strong back

DIMENSIONS WITHOUT EXTENSION

193″7/8 X 113″1/8 X 102″1/2 (492 cm X 287 cm X 260 cm)

WEIGHT (WITHOUT EXTENSION)

16 000 Lbs (7 257 Kg)

OPTIONS

Frame, deck, magnet trap, overflow restriction chain

 

M90S Twin Auger:

CAPACITY

775 ft3 (24 m3) no rubber extension available

MOTORIZATION

  • High efficiency Direct Drive motor with variable speed
  • 75HP 600v

 

CONTROL PANEL AND DRIVE

  • Manual control pannel 75HP
  • Drive control up to 4 speed motor for auger rotations

 

PLANETARY

Heavy Duty planetary

PTO

Enclosed PTO, lubrication free

SCALE AND LOADCELLS

DINAMICA or DIGISTAR scale and 4 loadcells, up to 10 000Lbs (4535 Kg)

DISCHARGE DOOR

Front centered discharge door controlled by an electric cylinder

STEEL

  • Canadian steel 44W – 3/4″ (19 mm) thick tub floor and 1/4″ (6mm) for the walls
  • 3/4” (19mm) auger

 

KNIVES

5 knives per auger (4 tungsten and 1 vertical) with a strong back

DIMENSIONS WITHOUT EXTENSION

193″7/8 X 113″3/8 X 112″7/8 (492 cm X 288 cm X 286 cm)

WEIGHT (WITHOUT EXTENSION)

18 000 Lbs (8 165 Kg)

OPTIONS

Frame, deck, magnet trap, overflow restriction chain

Specifications
Model
Rovibec Twin Vertical Auger Stationary Mixer
Category Name
Feeding Equipment
Year
2024
Sale Type
New
Manufacturer
Rovibec
Quantity
1
Manufacturer Qty
0
Sales People
Contact Information

 Contact Information

Embro Farm Systems Inc.

375058 LINE 37
EMBRO   Ontario , N0J 1J0

519-423-9595 844-361-9242

Location
Model
Rovibec Twin Vertical Auger Stationary Mixer
Category Name
Feeding Equipment
Year
2024
Sale Type
New
Manufacturer
Rovibec
Quantity
1
Manufacturer Qty
0

 Request More Info