Patz 2400 Series III Trailer TMR Vertical Mixer Series

Specifications

Mixer Capacity Capacity with Extensions Max. Load Capacity Height Width Length Tractor Horsepower Required PTO Operating Speed View Full Specs 810/810XH 810 ft³ (22.9 m³) 950 ft³ (26.9 m³) 20,250 lbs (9,185 kg) 99 in. (2.5 m) 109 in. (2.8 m) 325 in. (8.3m) 125 HP 1000 RPM 950/950XH 950 ft³ (26.9 m³) 1,100 ft³ (31.1 m³) 23,750 lbs (10,773 kg) 108-1/4 in. (2.7 m) 109 in. (2.8 m) 329 in. (8.4 m) 145 HP 1000 RPM 1100/1100XH 1100 ft³ (31.1 m³) 1,270 ft³  (36 m³) 27,500 lbs (12,474 kg) 131 in. (3.3 m) 109 in. (2.8 m)  358 in. (9.1 m) 170 HP 1000 RPM

STANDARD FEATURES AND OPTIONS

1

DISCHARGE CONVEYOR
Discharge conveyor for optional front door opening can be trailer mounted (feed not weighed on conveyor) or tub mounted (feed weighed on conveyor). Choice of fixed or sliding flat conveyors with right-hand, left-hand, or reversible discharge. Flat with incline and fixed incline conveyors with right-hand or left-hand discharge also available.

2

VORTEX® SCREW
Vortex® Screw mixes quickly without compromising feed quality. Constructed of welded steel with 5/8" cupped fliting. Choice of multi-angle or cone top design. Pre-drilled to accept knives.

3

OPTIONAL TUB MOUNTED MAGNET*

Encased in stainless steel, this magnet is strong enough to pull tramp metal from the ration while mixing. Mounted into the Patz vertical Mixer tub wall, the hinged assembly is designed for safe removal of tramp metal.

Exclusive to Patz – only to be installed on Patz Vertical Mixers. Factory and field installation is available on ALL Patz Stationary, Trailer, and Truck Mount Vertical Mixers.

*Patented

4

RAPTOR® KNIVES
Engineered to complement our standard knives, the Patented RAPTOR® knife features a forward-facing design to dig in, hook, & cut bales faster and more aggressively. Built to last with AR steel, the RAPTOR®  knife is ideal for high-hay rations including large round or square bales and/or baleage. RAPTOR® knives should be used in the first two or three slots from the top of the screw down, depending on knife formation. Available for all Vertical Mixer Series. Choice of five knife sizes. Contact your local Patz Mixer Dealer for details.

5

ELECTRONIC SCALES AND EXTENSION ARM
Increase your profits by accurately weighing feed ingredients with a dinamica generale®, Weigh-Tronix® or Digi-Star® scale. Easy-to-use, programmable electronic scales allow precise formulations. Basic read-up, read-down models and batching models with memory for different menus are available. A signal light or a signal buzzer indicates when desired weight is loaded. Remote display and a controller to zero the scale from a remote location are also available. Include manufacturer's 3-year warranty. Optional indicator extension arm improves viewing when loading from right or left side by extending the indicator an additional 15" from viewing platform.

6

CAMERA PACKAGE
View rear of mixer from tractor cab while backing up or discharging feed from optional rear commodity door. Includes 7" LCD monitor and weatherproof, shock-resistant infrared camera for night vision.

7

SELF-STEERING REAR AXLE
Available on the 1,100 cu. ft Patz 2400 Series II Trailer Twin Screw Vertical Mixer: Self-steering rear axle with heavy-duty spring suspension and four super single truck tires. Rear axle self-steers utilizing lateral forces that are applied to the tires from contact with ground. The forces steer the implement in the appropriate direction, minimizing tire wear and stresses on axles, hubs, spindles, and suspension pipe.

8

DRIVE PACKAGE
Choice of 2-speed manual shift, hydrostatic push button Powershift, or Autoshift (shifts transmission automatically) drive packages. Includes oil cooling system.

9

HYDRAULIC CONTROL CENTER
Optional hydraulic control center allows total control of multiple discharge doors all with the use of just one tractor port.

10

XH (EXTRA HEAVY) UNITS
XH (Extra Heavy) units feature a welded steel tub with 3/8" thick walls and a 3/4" reinforced bottom.